Heritage Series ADSL Bridge/ Router
Installing and Configuring your xDSL Router
4.
Enter the following parameters :
Bits per second
Data bits
Parity
Stop bits
Flow Control
Then click OK
6. When the HyperTerminal window appears, you must press the
enter key several time to get the command prompt for the
Router's command line interface.
7. Now you are ready to configure the Router by using command.
Please contact your ISP/NSP to obtain the detail command sets of
your Router. If the Router does not return any message, refer to
Appendix B for troubleshooting information.
9600
8
None
1
None
2-15