Table of Contents
Advertisement
To exit the Code Learning, do one of the following:
■ The doors are closed.
■ Turn the ignition on.
■ No activity for longer than 15 seconds.
■ Press the Valet/Program switch too many times.
features menu
FEATURE
NUMBER
1
2
3
4
5
6
7
8
9
10
NOTE: Factory defaults are indicated in bold type.
feature descriptions
1 ACTIVE/PASSIVE ARMING: When active arming is selected, the system will only arm when the transmitter is
used. When set to passive, the system will arm automatically 30 seconds after the last protected entry is closed.
Passive arming is indicated by the rapid flashing of the LED when the last protected entry point is closed.
2 CONFIRMATION CHIRPS ON/OFF: This feature controls the chirps that confirm the arming and disarming of
the system.
30
DEFAULT LED ON SETTINGS
(PRESS LOCK ICON TRANSMITTER BUTTON) (PRESS UNLOCK ICON TRANSMITTER BUTTON)
Active Arming
Confirmation Chirps ON
Ignition Controlled Door Lock/Unlock ON Ignition Controlled Door Lock/Unlock OFF
Active Locking
0.8-second Door Lock Pulse Duration
Double Pulse Unlock OFF
Code Hopping ON
Door trigger error chirp ON
Lock pulse Single
Comfort closure OFF
LED OFF SETTINGS
Passive Arming
Confirmation Chirps OFF
Passive Locking
3.5-second Door Lock Pulse Duration
Double Pulse Unlock ON
Code Hopping OFF
Door trigger error chirp OFF
Lock pulse Double
Comfort closure ON (20-seconds)
2008 Directed Electronics, Vista CA - all rights reserved
Hide quick links:
Advertisement
Table of Contents
