System Features Learn Routine - Avital 3300L Installation Manual

system features learn routine

Many of the features of this unit are programmable. They can be changed whenever necessary through this learn
routine. The Valet/Program switch, plugged into the blue port, is used together with a programmed transmitter
to change the settings.
To enter the feature learn routine:
1. Open a door. (The GREEN wire, H1/8, or the VIOLET, H1/6 must be connected.)
2. Ignition. Turn the ignition on, then back off. (The H1/4 YELLOW switched ignition input
must be connected.)
2. Choose. Within 10 seconds, press and release the Valet/Program switch the number of
times corresponding to the feature number you want to program (see the Features Menu
section of this guide). Then press the switch once more and hold it.
The LED will flash and the siren will chirp to indicate which feature you have accessed.
4. Transmit. While HOLDING the Valet/Program switch, you can select the desired features
setting using the remote transmitter. Pressing the lock icon transmitter button while
HOLDING down the Valet/Program switch will program the feature to the LED ON (default)
setting. The siren will chirp once. Pressing the unlock icon transmitter button while
HOLDING down the Valet/Program switch will change the setting to the LED OFF setting.
The siren will chirp twice.
5. Release. Release the Valet/Program switch.
To access another feature:
You can advance from feature to feature by pressing and releasing the Valet/Program switch the number of times
necessary to get from the feature you just programmed to the feature you wish to access. For example, if you
just programmed Feature 1 and you want to program Feature 2:
1. Release the Valet/Program switch.
2. Press and release the Valet/Program switch once to advance from Feature 1 to Feature 2.
3. Press the Valet/Program switch once more and HOLD it.
4. The siren will chirp two times to confirm that you have accessed Feature 2.
2008 Directed Electronics, Vista CA - all rights reserved
29