Avital 3300L Installation Manual page 34

Car security system directed

Hide thumbs Also See for 3300L:

Table of Contents

■ Door input does not respond with the progressive trigger, but with immediate full alarm:

Does the LED indicate that the trigger was caused by the impact sensor? (See Table of Zones section of this

guide.) The impact sensor, if set to extreme sensitivity, may be detecting the door unlatching before the door

switch sends its signal. Reducing the sensitivity can solve this problem.

■ The Valet/Program switch does not work:

Is it plugged into the correct socket? (See Plug-In LED and Valet/Program Switch section of this guide.)

■ The LED system status indicator does not work:

You've probably guessed already, but here goes: is it plugged in? Is the LED plugged into the correct socket?

(See Plug-In LED and Valet/Program Switch section of this guide.)

■ Starter interrupt does not work:

Is the correct wire being interrupted? If the vehicle starts when the starter interrupt is completely disconnected,

the wrong wire has been cut.

Is the yellow H1/4 ignition wire connected to true ignition? This wire must be powered in the run and start

positions of the ignition switch in order to work properly.

Table of Contents

Show Quick Links

Table of Contents