Programming Alarm System Features; Pro Gram Ming Ta Ble For Alarm Fea Tures - Avital Diablo Installation Manual

Programming Alarm System Features

Programming Alarm System Features
All programmable alarm features are accomplished by turning the ignition All programmable alarm features are accomplished by turning the ignition
key on (or starting the vehicle) and flicking the valet switch on and off a key on (or starting the vehicle) and flicking the valet switch on and off a
preset number of times. preset number of times.
1. Remove the alarm from valet. Programming cannot be accessed while 1. Remove the alarm from valet. Programming cannot be accessed while
the alarm is in the valet mode indicated by the LED on solid red. the alarm is in the valet mode indicated by the LED on solid red.
2. Select the feature you wish to program from the "Programming Table 2. Select the feature you wish to program from the "Programming Table
for Alarm Features." Note the number of chirps. for Alarm Features." Note the number of chirps.
3. Turn the ignition key to the "ON" position. 3. Turn the ignition key to the "ON" position.
4. Within 10 seconds, begin flicking the valet switch on and off. The siren 4. Within 10 seconds, begin flicking the valet switch on and off. The siren
will chirp one time each time you flick the switch on then off. will chirp one time each time you flick the switch on then off.
5. Continue flicking the switch on and off until you reach the number of 5. Continue flicking the switch on and off until you reach the number of
chirps associated with your chosen feature. chirps associated with your chosen feature.
NOTE: Stop on the chirp. NOTE: Stop on the chirp.
6. After a 3 second pause, you will hear 1 or 2 chirps noted to confirm 6. After a 3 second pause, you will hear 1 or 2 chirps noted to confirm
that you have changed the setting of that feature. that you have changed the setting of that feature.
7. Turn the ignition key off. 7. Turn the ignition key off.
8. Repeat steps 1-7 for any other feature you wish to program. 8. Repeat steps 1-7 for any other feature you wish to program.

Pro gram ming Ta ble for Alarm Fea tures

Pro gram ming Ta ble for Alarm Fea tures
Fac tory Fac tory
Fea ture Fea ture
Set ting Set ting
Passive/Active Passive/Active
Passive ON Passive ON
Arming Arming
Passive Door Passive Door
OFF OFF
Locking Locking
Remote Arming Remote Arming
ON ON
Siren Chirps Siren Chirps
Door Trigger Door Trigger
(-) Trigger (-) Trigger
Polarity Select Polarity Select
Two Pulse Unlock Two Pulse Unlock 1 Pulse 1 Pulse
Diablo
# of # of
Chirps Chirps
Wait 3 seconds, the siren chirps once for active or Wait 3 seconds, the siren chirps once for active or
4 4
Wait 3 seconds, the siren chirps once for OFF or Wait 3 seconds, the siren chirps once for OFF or
5 5
Wait 3 seconds, the siren chirps once for OFF or Wait 3 seconds, the siren chirps once for OFF or
6 6
Wait 3 seconds, the siren chirps once for (+) trigger Wait 3 seconds, the siren chirps once for (+) trigger
7 7
Wait 3 seconds, the siren will chirp once for 2 pulse Wait 3 seconds, the siren will chirp once for 2 pulse
8 8
13
2
/AMX 68/AT-58 Installation Manual 3/31/99
Sec on dary Ac tion Sec on dary Ac tion
twice for passive. twice for passive.
twice for ON. twice for ON.
twice for ON. twice for ON.
or twice for (-) trigger. or twice for (-) trigger.
or twice for 1 pulse. or twice for 1 pulse.