Device Config; Device Configuration - Toshiba TECRA M4 User Manual

HW Setup
Dynamic CPU Frequency Mode
This option lets you choose from the following settings:
Dynamically
Switchable
Always High
Always Low
LAN
Wake-up on LAN
This feature lets the computer's power be turned on when it receives a
wake-up signal from the LAN.
Enabled
Disabled
Do not install or remove an optional memory module while Wake-up on
LAN is enabled.
The Wake-up on LAN function consumes power even when the system is
off. Leave the AC adaptor connected while using this feature.
Built-in LAN
This feature enables or disables the Built-in LAN.
Enabled
Disabled

Device Config

Device Configuration

This option lets you set the device configuration.
All Devices
Setup by OS
7-6
CPU power consumption and clock speed
automatic switching function is enabled. When
the computer is in use, CPU operation is
automatically switched when necessary
(Default).
CPU power consumption and clock speed
automatic switching function is disabled. The
CPU always runs at its fastest speed.
CPU power consumption and clock speed
automatic switching function is disabled. The
CPU always runs at low power consumption and
low speed.
Enables Wake-up on LAN.
Disables Wake-up on LAN (Default).
Enables Built-in LAN functions (Default).
Disables Built-in LAN functions.
BIOS sets all devices.
Operating system sets devices that it can control
(Default).
User's Manual