Toshiba TECRA M4 User Manual page 60

The Grand Tour
DC IN
Power
Depending on the settings, the high speed recovery mode may not work.
Refer to the Power indicator in Chapter 6,
Battery
HDD
Slim Select Bay
Wireless
communication
2-12
The DC IN indicator glows in green when DC
power is supplied from the AC power adaptor. If
the adaptor's output voltage is abnormal or if the
power supply malfunctions, this indicator flashes
orange.
The Power indicator glows in green when the
computer is on. If you select Standby from Shut
Down Windows, this indicator blinking orange
(one second on, two seconds off) while the
computer shuts down.
If the HW Setup high speed recovery function is
set to "Fast", the power indicator will glow in
orange.
Power and Power-Up
The Battery indicator shows the condition of the
battery's charge: Green indicates full charge,
orange indicates battery charging and flashing
orange indicates a low battery charge. Refer to
Chapter 6, Power and Power-Up
The HDD indicator glows green when the
computer is accessing the built-in hard disk.
The Slim Select Bay indicator glows in green
when the computer is accessing a DVD-ROM
drive, DVD-ROM&CD-R/RW drive and DVD
Super Multi drive or secondary hard disk drive in
the Slim Select Bay.
When the secondary battery is in the Slim Select
Bay, the Slim Select Bay indicator glows as
follows:
green : fully charged
orange : charging the battery
The Wireless communication indicator glows
when the wireless LAN and Bluetooth functions
are turned on.
Some models are equipped with a Wireless
communication.
Modes.
Modes.
User's Manual