Table of Contents
Advertisement
The Wake-up on LAN function consumes power even when the system is
off. Leave the AC adaptor connected while using this feature.
Built-in LAN
This feature enables or disables the Built-in LAN.
Enabled
Disabled
Device Config
Device Configuration
This option lets you set the device configuration.
All Devices
Setup by OS
Parallel/Printer
Some models are equipped with Parallel/Printer tab. This tab lets you set
the Parallel Port Mode. Use the Windows Device Manager to make settings
for the Parallel port.
Parallel Port Mode
This option is not displayed in some models.
The options in this tab are ECP and Standard Bi-directional.
ECP
Standard
Bi-directional
USB
USB KB/Mouse Legacy Emulation
Use this option to enable or disable USB KB/Mouse Legacy Emulation. If
your operating system does not support USB, you can still use a USB
mouse and keyboard by setting the USB KB/Mouse Legacy Emulation
item to Enabled.
User's Manual
Enables Built-in LAN functions. (Default)
Disables Built-in LAN functions.
BIOS sets all devices.
Operating system sets devices that it can control.
(Default)
Sets the port type to Extended Capabilities Port
(ECP). For most printers, the port should be set
to ECP. (Default)
This setting should be used with some other
parallel devices.
HW Setup
7-7
Advertisement
Table of Contents
