Toshiba TECRA M4 User Manual page 167

HDD Priority Options
If more than one HDD is installed in the computer, this option lets you set
the priority for HDD detection. If the first detected HDD has a boot
command, the system will boot from the HDD.
Built-in HDD −>
2nd HDD (Default)
2nd HDD −> Built-
in HDD
Built-in HDD ->
2nd HDD -> USB
(Default)
2nd HDD -> Built-
in HDD -> USB
Built-in HDD ->
USB -> 2nd HDD
2nd HDD -> USB ->
Built-in HDD
USB -> Built-in
HDD -> 2nd HDD
USB -> 2nd HDD ->
Built-in HDD
■
If a boot command is not found on the first detected HDD, the system
will not boot from the other HDD. It will search the next device in the
boot priority for a boot command.
■
Some modules may not be displayed.
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in Standby mode, you
can turn on the computer by pressing any key. It is effective only for the
internal keyboard and only when the computer is in standby mode.
Enabled
Disabled
CPU
This function lets you set the CPU operating mode.
It is displayed in Pentium-M
User's Manual
The computer will look for the Built-in HDD first
and then 2nd HDD (Default).
The computer will look for the 2nd HDD first and
then Built-in HDD.
The priority is set as built-in HDD -> 2nd HDD ->
USB.
The priority is set as 2nd HDD -> built-in HDD ->
USB.
The priority is set as built-in HDD -> USB -> 2nd
HDD.
The priority is set as 2nd HDD -> USB -> built-in
HDD.
The priority is set as USB -> built-in HDD -> 2nd
HDD.
The priority is set as USB -> 2nd HDD -> built-in
HDD.
Enables the Wake-up on Keyboard.
Disables the Wake-up on Keyboard (Default).
®
model only.
HW Setup
7-5