Device Config; Device Configuration - Toshiba PORTÉGÉ R300 User Manual

LAN
Wake-up on LAN
This feature lets the computer's power be turned on when it receives a
wake-up signal from the LAN.
Power will be automatically turned on when a signal is received from an
administrator's computer which is connected via a network.
The following settings can be changed when the Built-in LAN is Enabled.
Connect the AC adaptor when using the Wake-up on LAN function. The
battery retention time will be shorted than the times listed in this manual
when this function is enabled. Refer to the section in chapter 6,
data with power
Enabled
Disabled
Do not install or remove an optional memory module while Wake-up on
LAN is enabled.
The Wake-up on LAN function consumes power even when the system is
off. Leave the AC adaptor connected while using this feature.
Built-in LAN
This feature enables or disables the Built-in LAN.
Enabled
Disabled

Device Config

Device Configuration

This option allows you to set how the computer's hardware devices will be
configured.
All Devices
Setup by OS
User's Manual
off.
Enables Wake-up on LAN.
Disables Wake-up on LAN (Default).
Enables Built-in LAN functions (Default).
Disables Built-in LAN functions.
The computer's BIOS will setup and configure all
devices.
The operating system will setup and configure all
of the devices that it can control (default).
HW Setup & BIOS Setup
Retaining
7-7