Moving The Computer - Toshiba TECRA M4 User Manual

Moving the computer

The computer is designed for rugged durability. However, a few simple
precautions taken when moving the computer will help ensure trouble-free
operation.
■
Before moving the computer, it recommends changing the function of
HDD Protection. Refer to the section,
Protection, in this chapter.
■
Make sure all disk activity has ended before moving the computer.
Check the HDD and Slim Select Bay indicators on the computer.
■
If a CD/DVD is in the drives, remove it. Also make sure the disc tray is
securely closed.
■
Turn off the power to the computer.
■
Disconnect the AC adaptor and all peripherals before moving the
computer.
■
Close the LCD display panel. Do not pick up the computer by its panel.
■
Close all port covers.
■
Before carrying your PC, shut down the PC, disconnect the power cable
and wait until the PC cools down. Failure to follow this instruction could
result in minor injury.
■
Always turn off the power when you move the PC. If the power button
has a lock, set it to the lock position. Also be careful not to subject the
PC to impact. Failure to follow this instruction could result in damage to
PC, PC failure or loss of data.
■
Never transport your PC with PC cards installed. This could cause
damage to your PC and/or PC card, resulting in product failure.
■
Use the carrying case when transporting the computer.
■
When carrying your computer, be sure to hold it securely so that it does
not fall or hit anything.
■
Do not carry your computer by holding protruded portions.
User's Manual
Operating Basics
Using the Hard Disk Drive (HDD)
4-41