Security Lock - Toshiba TECRA M4 User Manual

2. Connect the cable into the Advanced Port Replicator III's parallel port.
3. Tighten the screws that fasten the connector to the Advanced Port
Replicator III's parallel port.
4. Connect the other connecter of the cable into the printer's parallel
connector.
5. Fasten the connector to the printer with the clips on the parallel port.
6. Turn on the printer's power.
7. Turn on the computer's power.
8. Start the HW Setup program. Refer to Chapter 7,
9. Select the Parallel/Printer tab from the TOSHIBA HW Setup
window.
10. Set the Parallel Port Mode and press OK.
11. Choose Reboot for the change to take effect.
12. Select the printer in Windows Add Print Wizard. To access the Add
Print Wizard utility, click start, click Control Panel, click Printers
and Other Hardware and select the Add Printer.

Security lock

Security locks enable you to anchor your computer and optional Advanced
Port Replicator III and Tablet Multi Dock II to a desk or other heavy object
to help prevent unauthorized removal of the computer or Advanced Port
Replicator III and Tablet Multi Dock II.
The computer has a security lock slot on the left side. Attach one end of a
cable to a desk and the other end to the security lock slot.
1. Turn the computer so the left side faces you.
2. Align the holes for the security lock and attach the lock.
Security lock slot
User's Manual
Figure 8-17 Security lock
Optional Devices
HW Setup.
8-19