Device Config; Pointing Devices - Toshiba Portégé M100 User Manual

User's Manual
Setup
This field displays BIOS Version and date.

Device Config

Device Configuration
This option lets you set the device configuration.
Setup by OS
All Devices
Parallel/Printer
This tab lets you set the Printer Port Type. Use the Windows Device Manager to
make settings for the Parallel port.
Parallel Port Mode
Let you use the display to be used when the computer is booted (this setting is
only available windows Logo is displaying and not available after Windows
Desktop is displayed).
ECP
Standard
Bi-directional

Pointing Devices

Pointing Devices
This tab lets you select Auto-Selected and Simultaneous.
Auto-Selected
Simultaneous
Display
This tab lets you customize your computer's display settings for either the internal
LCD screen or for an external monitor.
7-2
Operating system sets devices that it can control. (Default)
BIOS sets all devices.
Sets the port type to Extended Capabilities Port (ECP). For
most printers, the port should be set to ECP. (Default)
This setting should be used with some other parallel
devices.
If a PS/2 mouse is connected to the Port Replicator when
you turn on the power, the PS/2 mouse is enabled and
the AccuPoint II is disabled. Otherwise, the AccuPoint II
is enabled. (Default)
Enables both the AccuPoint II and a PS/2 mouse.