Toshiba TECRA M4 User Manual page 36

Introduction
Supplied Tablet PC
Pen
Reserve Pen
Ports
External monitor
Universal Serial Bus
(USB 2.0)
Docking interface
i.LINK™ (IEEE1394)
Infrared
Slots
PC card
SD card
1-8
A pen enables data entry directly through the
display screen.
A pen enables data entry directly through the
display screen. Supplied pen uses a pen instead
of Tablet PC Pen at the time of loss or breakage.
Some computers in the series are equipped with
a Reserve Pen.
Analog VGA port supports VESA DDC2B
compatible functions.
The computer has Universal Serial Bus ports that
comply with the USB 2.0 standard, which
enables data transfer speeds 40 times faster
than the USB 1.1 standard (The ports also
support USB 1.1).
This port enables connection of an optional
Advanced Port Replicator III described in the
Options section.
This port enables high-speed data transfer
directly from external devices such as digital
video cameras.
The serial infrared port is compatible with
Infrared Data Association (IrDA 1.1) standards. It
enables cableless 4 Mbps, 1.152 Mbps, 115.2
kbps, 57.6 kbps, 38.4 kbps, 19.2 kbps or 9.6
kbps data transfer with IrDA 1.1 compatible
external devices.
The PC card slot accommodate a Type II card.
This slot lets you easily transfer data from
devices, such as digital cameras and Personal
Digital Assistants, that use SD card flash-
memory.
You can use memory module in this slot.
Refer to Chapter 8, Optional Devices.
User's Manual