Toshiba TECRA M4 User Manual page 115

■
■
■
■
■
■
■
■
2. Before recording the video to DVD
■
■
■
■
■
■
■
■
■
User's Manual
Do not change display settings while using WinDVD Creator.
Do not enter standby/hibernation mode while using WinDVD
Creator.
Do not operate WinDVD Creator immediately after turning on the
computer. Please wait until all Disc Drive activity has stopped.
When recording to a DV-Camcorder, to ensure you capture all of
your data, let the camcorder record for a few seconds before you
begin recording your actual data.
CD recorder, JPEG functions, DVD-Audio, mini DVD and Video CD
functions are not supported in this version.
While recording video to DVD or tape, please close all other
programs.
Do not run software like a screen saver because it can put a heavy
load on the CPU.
Do not run communication applications like a modem or a LAN.
When you record to DVD disc, please use only discs recommended
by the Drive manufacturer.
Do not set the working drive to a slow device like a USB 1.1 hard
disk drive or it will fail to write DVD.
Do not perform any of the following actions:
• Operate the computer for any other function, including using a
mouse or Touch Pad or closing/opening the LCD panel.
• Bump or cause vibration to the computer.
• Use the Mode control button and Audio/Video control button to
reproduce music or voice.
• Open the optical media drive.
• Install, remove or connect external devices, including the
following:
PC card, SD card, USB devices, external monitor, i.LINK. devices,
optical digital devices.
Please verify your disc after recording important data.
DVD-R/+R/-RW disc cannot be written in VR format.
WinDVD Creator cannot export to DVD-Audio, VideoCD, miniDVD
format.
WinDVD Creator can write DVD-RAM/+RW in VR format, but the
disc may only play on your computer.
When writing to DVD disc, WinDVD Creator requires 2GB or more
over disk space every one hour of video.
When you make a fully recorded DVD, the chapter sequence may
not play correctly.
Operating Basics
4-29