JVC KW-NX7000 Instructions Manual page 91

Listening to the satellite radio
Before operating, connect either one of the following (separately purchased) to the CD changer jack on the rear of
this unit.
• JVe SIRIUS Satellite radio interface, KS-SRA100, for listening to SIRIUS Satellite radio.
• JVe Smart Digital Adapter, XMDJVC100, for listening to XM Satellite radio.
• Ik?
also page 58
on the remote controller:
The XMDirect™ Universal Tuner Box starts
updating all the XM channels. "Channell"
is tuned in automatically.
(Ik?
"GO update"
column below.)
Check your XM Satellite radio
ID labelled on the casing of the
XMDirect™ Universal Tuner Box, or
tune in to IIChannel 0.
11
(1&
page 92)
Contact XM Satellite radio on the internet
at <http://xmradio.com/activation/> to
activate your subscription, or you can call
1-800-XM-RADI0 (1-800-967-2346).
Once completed, the unit tunes in to one of the
available channels (Channel 4or higher).
• ForXM Radio
Activate your subscription after connection:
• Only Channel 0, 1, and 247 are available before activation.
• Turn on the power.
on the monitor panel: ""''''
~
• Select IISAT" for the source.
on the remote controller:
~
• Ik?
also page 58
•
•
The SIRIUS Satellite radio starts updating all
the SIRIUS channels.
(Ik?
"GCI update" column
below.)
• Once completed, SIRIUS Satellite radio tunes
in to the preset channel, CH184.
Check your SIRIUS ID.
(1&
page 107)
Contact SIRIUS on the internet at
<http://activate.siriusradio.com/>
to activate your subscription, or you
can call SIRIUS toll-free at 1-888-539-
SIRIUS (7474).
"Subscription Updated Press Any Key to Continue"
appears on the monitor once subscription has been
completed.
• For SIRIUS Radio
Activate your subscription after connection:
• Turn on the power.
on the monitor panel: """"
~
• Select IISAT" for the source.
•
•
Gel (Global eontrollnformation) update:
• If channels are updated after subscription, updating starts automatically, and no sound can be heard.
For SIRIUS: "Channel is Updating XXO/O completed" appears.
For XM : "UPDATING" appears.
• Updating takes afew minutes to complete.
• Do not press any buttons or perform any operations until updating is completed.
91
AV OPERATIONS