Usb Operations - JVC KW-NX7000 Instructions Manual

USB
operations
You can connect aUSB mass storage class device such as aUSB memory, Digital Audio Player, portable HDD, etc. to
the unit.
• You can also connect the iPod to the USB terminal of the unit. For details of the operations,
IJ-E
pages 96 to 98.
o
Conned a USB device.
USB cable from the rear of the unit
• You cannot connect acomputer to the USB (
~)
terminal of the unit.
The source changes to "USB" and playback starts.
This unit can play JPEG/MPEG1/MPEG2*1
IMP3/WMAI
WAV I AAC*2 files stored in USB mass storage class
device.
• You can operate the USB device in the same way you
operate the files on discs.
(IJ-E
pages 66 to 70, 73 and
74)
• All tracks in the USB device will be played repeatedly
until you change the source.
• Make sure all important data has been backed up.
*1
Except for MPEG2 files recorded by JV( Everio
camcorder (extension code <.mod».
*2
This unit can play back AA( files encoded using
iTunes. This unit cannot play back FairPlay-encrypted
files.
80
• Avoid using the USB device if it might hinder your
safety driving.
• Do not pull out and attach the USB device
repeatedly while "Now Reading..." is flashing on
the monitor screen.
• Do not start the car engine if aUSB device is
connected.
• Stop playback before disconnecting aUSB device.
• Do not leave aUSB device in the car, expose to
direct sunlight, or high temperature to avoid
deformation or cause damages to the device.
• For more details about USB operations,
IJ-E
page 114.