JVC KW-NX7000 Instructions Manual page 111

( The procedure for setting an item is shown on page 16. )
Selectable settings, [reference pagel
1&
[82]
1&
[83]
Only for "NEW DEVICE."
Shows the list of Bluetooth devices which require some special procedure to
establish Bluetooth connection. Select adevice you want to connect.
• After selecting the device, use
<Open>
or
<Search>
(1&
page 82 or 83)
for connection.
• Once the connection is established, it is registered in the unit. You can
connect the unit and the device by using
<Connect>
(1&
below) from
the next time.
Only for the registered devices.
After selecting adevice from among the registered devices
(1&
pages 82 and
83), establish the connection with it.
Only for the device being connected.
Disconnect the current device before connecting another device.
Only for the registered devices.
Delete the registered devices.
When the unit is turned on, the connection is established automatically
with...
Off:
No Bluetooth device.
Last: The last connected Bluetooth device.
Order:
The available registered Bluetooth device found first.
Off:
The unit does not answer the calls automatically. Answer the calls
manually.
On:
The unit answers the incoming calls automatically.
Reject: The unit rejects all incoming calls.
Auto:
The unit informs you of the arrival of amessage by ringing and
displaying "Receiving Message." To read the message,
1&
page 85.
Manual: The unit does not inform you of the arrival of amessage.
Adjust microphone volume connected to the Bluetooth adapter.
01/02/03
The Bluetooth software and hardware versions are shown.
*8
Selectable only for "Bluetooth PHONE. "
119
Only for the cellular phone connected for "Bluetooth PHONE."Not selectable when "NEW DEVICE"is selected.
*10
Ifyou wish to receive more information about Bluetooth, visit the following JVC web site: <http://www.jvuo.jp/
englishkar/> (English website only)
When operating the Bluetooth device, refer also to the instructions supplied with the device.
111
AV OPERATIONS
( The procedure for setting an item is shown on page 16. )
Selectable settings, [reference pagel
1&
[82]
1&
[83]
Only for "NEW DEVICE."
Shows the list of Bluetooth devices which require some special procedure to
establish Bluetooth connection. Select adevice you want to connect.
• After selecting the device, use
<Open>
or
<Search>
(1&
page 82 or 83)
for connection.
• Once the connection is established, it is registered in the unit. You can
connect the unit and the device by using
<Connect>
(1&
below) from
the next time.
Only for the registered devices.
After selecting adevice from among the registered devices
(1&
pages 82 and
83), establish the connection with it.
Only for the device being connected.
Disconnect the current device before connecting another device.
Only for the registered devices.
Delete the registered devices.
When the unit is turned on, the connection is established automatically
with...
Off:
No Bluetooth device.
Last: The last connected Bluetooth device.
Order:
The available registered Bluetooth device found first.
Off:
The unit does not answer the calls automatically. Answer the calls
manually.
On:
The unit answers the incoming calls automatically.
Reject: The unit rejects all incoming calls.
Auto:
The unit informs you of the arrival of amessage by ringing and
displaying "Receiving Message." To read the message,
1&
page 85.
Manual: The unit does not inform you of the arrival of amessage.
Adjust microphone volume connected to the Bluetooth adapter.
01/02/03
The Bluetooth software and hardware versions are shown.
*8
Selectable only for "Bluetooth PHONE. "
119
Only for the cellular phone connected for "Bluetooth PHONE."Not selectable when "NEW DEVICE"is selected.
*10
Ifyou wish to receive more information about Bluetooth, visit the following JVC web site: <http://www.jvuo.jp/
englishkar/> (English website only)
When operating the Bluetooth device, refer also to the instructions supplied with the device.
111
AV OPERATIONS