Initial Settings - JVC KW-NX7000 Instructions Manual

Installation settings _
Initial settings
When you turn on the unit for the first time, the initial
A
setup screen appears. Follow the procedure below and
~
make the necessary settings.
Indication language:
In this manual, English indications are used for
the purpose of explanation. You can select the
indication language.
o
Turn on the power.
llS=o
c::=::::l c:J 0
JVC
0 c::J
~
011
J
-----
o""n~
• Select the language you want for the
display and the voice guidance.
The power is turned off then turned on
automatically so that your setting takes effect.
7
Normally select [Start Installation Settings].
• If you select [Skip Installation Settings
(for store display)), the System starts in the
navigation demonstration mode for stores
(1&
page 53).
You need to make the settings you turn on the
power next time.
Continued on the next page
INTRODUCTION