Setup - Strand Lighting 200 Console Operation Manual

Setup

Note: The power supplies are pack in the side of the packing material.
Plug the DMX 512 cable from the dimmer rack (or any
DMX device) into the DMX
The 200 console will go through a self-test and return to the last known state.
Page 12
Plug the appropriate power adaptor into the console
where shown.
appropriate electrical service.
512 output of the 200 console.
Turn the console on via the rocker switch on the back plate and
the console is ready to go!
Plug the male end into the
Strand 200 Console Manual