Crossfade Start Scene Option - Strand Lighting 200 Console Operation Manual

Crossfade Start Scene Option

1. Edit Scene
2. Delete Scene
3. Xfade Start Scene
Esc
Use the +/– keys to change the submaster that will
start the crossfade sequence.
Press Esc to disregard changes or Confirm to accept.
Note: The next submaster crossfade will start with the selected scene. Upon completion of
the crossfade, the setting will be automatically reset to 1.01.
Strand 200 Console Manual
Notice the cursor flashing over the 1 for edit scene.
Press the right arrow to advance to the crossfade start
scene option and press F3 for Confirm.
Confirm
Xfade start address
Scene:1.01
Esc (+/-) Confirm
Page 31