Show File - Strand Lighting 200 Console Operation Manual

Show File

The show file options allows the operator to save, load and delete a show file. Follow the
steps below...
Press F3 to go into the Setup menu.
Notice the cursor flashing over the 1 for patch.
Press Next to go to the next setup screen.
Notice the cursor flashing over the 4 for audio.
Press the right arrow key to access Show file then
press F3 to Confirm.
Pick and option for the action that is needed.
Press F3 to Confirm.
No show file functions can be performed without a
compact flash card installed.
Only a 32M compact flash card can be used. The compact flash card has to be dedicated to the 200
console. It cannot share with other devices due to a different file format. The show file cannot be
read on a standard PC.
A 32M compact flash card can be purchased at any local computer or electronics store.
Page 40
Scene Pg: 1
Preset A: FL
Scene FX
1. Patch
2. Self Test
3. Midi
Esc Next
4. Audio
5. LCD setting
6. Show file
Esc Next
1. Save show
2. Load show
3. Del show
Esc
No card found!
Insert a 32M
Compact Flash
Esc
Strand 200 Console Manual
Fx Pg: 2
B: 00
Setup
Confirm
Confirm
Confirm