Motorola AP-7131N-FGR Installation Manual page 40

34 AP-7131N-FGR Access Point: Installation Guide
1. Select Network Configuration
2. Select the
tunnel to provide secure access to the access point's external NTP, syslog or Radius
resources.
3. Refer to the
tunnel:
Tunnel Name
Interface name
Local WAN IP
Remote Subnet
Add button from within the
VPN Tunnel Config
Enter a name to define the VPN tunnel. The tunnel name is used to
uniquely identify each tunnel.
Use the drop-down menu to specify the LAN1, LAN2 or WAN
connection used for routing VPN traffic. Remember, only one LAN
connection can be active on the access point Ethernet port at a
time.
Enter the WAN's numerical (non-DNS) IP address in order for the
tunnel to pass traffic to a remote network.
Specify the numerical (non-DNS) IP address for the Remote Subnet.
-> WAN -> VPN from the access point menu tree.
VPN Tunnels field to define the attributes of a new
field and define the following attributes for the VPN