Motorola AP-7131N-FGR Installation Manual page 20

14 AP-7131N-FGR Access Point: Installation Guide
11. The access point is ready to configure. For information on basic access point device
configuration, see "
NOTE
2.5.3 Above the Ceiling (Plenum) Installations
An above the ceiling installation requires placing the access point above a suspended ceiling and
installing the provided light pipe under the ceiling tile for viewing the rear panel status LEDs of the
unit. An above the ceiling installation enables installations compliant with drop ceilings, suspended
ceilings and industry standard tiles from .625 to .75 inches thick.
Configuring "Basic" Device Settings
If the access point is utilizing remote management antennas, a wire
cover can be used to provide a clean finished look to the installation.
Contact Motorola for more information.
" on page 25.