Download Print this page

Advertisement

18
AP-7131N-FGR Access Point: Installation Guide

2.6 LED Indicators

An AP-7131N-FGR access point has six LEDs on the top of the access point housing, and one optional
LED light pipe at the bottom of the unit. However, an AP-7131N-FGR model access point does not use
LED 6, as no third radio is available. Five LEDs illuminate (on top of the housing) for dual radio
AP-7131N-FGR models.
The access point utilizes two (different colored) lights below each LED. Only one light displays within
a LED at any given time. Every light within each LED is exercised during startup to allow the user to
see if an LED is non-functional. The LEDs turn on and off while rotating around in a circle. Since two
LEDs feed each light pipe, the pattern is from left to right, then right to left.
NOTE
NOTE
The LEDs on the top housing of the access point are clearly visible in wall and below ceiling
installations. The top housing LEDs have the following display and functionality:
The LED blink rate is proportional to activity. The busiest traffic
corresponds to the fastest blink, while the slowest traffic corresponds to
slowest blink.
Depending on how the 5 GHz and 2.4 GHz radios are configured, the LEDs
will blink at different intervals between amber and yellow (5 GHz radio)
and emerald and yellow (2.4 GHz radio).

Advertisement

   Also See for Motorola AP-7131N-FGR

Comments to this Manuals

Symbols: 0
Latest comments: