Motorola AP-7131N-FGR Installation Manual page 16

Access point
Hide thumbs Also See for AP-7131N-FGR:
Table of Contents

Advertisement

10
AP-7131N-FGR Access Point: Installation Guide
To mount the access point on a wall using the provided template:
1. Xerox copy the template (on the previous page) to a blank piece of paper. Do not reduce
or enlarge the scale of the template.
2. Tape the template to the wall mounting surface.
If the installation requires the antenna be positioned vertically, the centerline
reference (of the template) needs to be positioned vertically. The cabling shall exit
the access point in a vertical direction.
If the installation requires the antenna be positioned horizontally, the vertical
centerline (of the template) needs to be positioned horizontally. The cabling shall
exit the access point in a horizontal direction.
3. At mounting targets A and B, mark the mounting surface through the template at the
target center.
4. Discard the mounting template.
5. At each point, drill a hole in the wall, insert an anchor, screw into the anchor the wall
mounting screw and stop when there is 1mm between the screw head and the wall.
If pre-drilling a hole, the recommended hole size is 2.8mm (0.11in.) if the screws are
going directly into the wall and 6mm (0.23in.) if wall anchors are being used.
6. If required, install and attach a security cable to the access point lock port.
7. Attach the antennas to their correct connectors.
8. For information on available antennas, see "
9. Place the large center opening of each of the mount slots over the screw heads.
10. Slide the access point down along the mounting surface to hang the mount slots on the
screw heads.
If printing the mounting template (on the previous page) from an
CAUTION
electronic PDF, dimensionally confirm the template by measuring each
value for accuracy.
Ensure you are placing the antennas on the correct connectors to
CAUTION
ensure the successful operation of the AP-7131N-FGR access point.
It is recommended the access point be mounted with the RJ45 cable
NOTE
connector oriented upwards or downwards to ensure proper operation.
" on page 5.
Antenna Options

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents