Bar Coded Parameter Menu - Denso AT20B-SM User Manual

11.2 Bar coded Parameter Menu

■ Menu control (Starting/Ending the Setting Procedure and Reverting to Defaults)
Start setting
End setting
All defaults
Cancel
The beeper volume can be set by reading the following Barcode symbol only. No "Start setting" or "End
setting" Barcode symbol required to be scanned.
Adjusting the beeper volume
Reading this Barcode symbol cycles the beeper volume through High, Medium and Low. The factory
default is High.
Beeper volume
USB interface to the host
< USB keyboard interface >
(default)
USB-COM interfacce
69