Blocksorting Mode - Denso AT20B-SM User Manual

7.2.3 Block sorting mode
The scanner splits barcode data read into a maximum of 5 blocks at the specified separate positions, sorts those
blocks in the specified order, and outputs it in the data transmission format selected in the scanner (see Chapter
9, Section 9.4).
Note: The separate position must be specified by the number of digits from the head of barcode data read.
Specifying the number of digits exceeding that in the barcode data results in an error.

Block sorting conditions
Block sorting conditions
"Code type"
"Transmit data regardless of the results"
Example Code type : CODE128, Data : 1234567890
Header : STX, Terminator : ETX, Scanner ID : Disable, Code ID mark : Disable,
Transmission of the number of digits : 4 digits, Prefix / Suffix : None, BCC : Disable
Separate position
3rd position, 8th position
3rd position, 8th position
Any code
UPC-A/EAN-13
UPC-E
EAN-8
CODE128
GS1-128 (EAN-128)
CODABAR (NW-7)
CODE39
Interleaved 2 of 5(ITF)
Standard 2 of 5(STF)
CODE32
CODE93
MSI
Plessey
GS1 DataBar (RSS)
Permit / Prohibit
Oder of blocks
Block2, 1, 3 [STX]K00104567812390[ETX]
Block1, 3
31
Setting data
Output data
[STX]K000512390[ETX]