Denso AT20B-SM User Manual page 73

CODE128, GS1-128 (EAN-128)
Item
Reading CODE128
Reading GS1-128 (EAN-128)
Minimum number of readable
digits for CODE128
Maximum number of readable
digits for CODE128
FNC1 transmission of CODE128
Minimum number of readable
digits for GS1-128 (EAN-128)
Maximum number of readable
digits for GS1-128 (EAN-128)
FNC1 transmission of
GS1-128(EAN-128)
NOTE 1 : The parameter setting range is not equal to the number of Scanner's readable digits.
2 : With the barcode menu, CODE128, GS-128(EAN-128) will be enabled / disabled at the same time.
CODE93
Item
Reading CODE93
Minimum number of readable
digits for CODE93
Maximum number of readable
digits for CODE93
NOTE 1 : The parameter setting range is not equal to the number of Scanner's readable digits.
MSI
Item
Reading MSI
C/D transmission of MSI
Minimum number of readable
digits for MSI
Maximum number of readable
digits for MSI
NOTE 1 : The parameter setting range is not equal to the number of Scanner's readable digits.
Parameter
Enabled
Disabled
Enabled
Disabled
1 to 99 digits
(excl. start/stop codes and
1-digit C/D)
Disabled
Convert to GS before Transmission
1 to 99 digits
(excl. start/stop codes and
1-digit C/D)
Disabled
Convert to GS before Transmission
Parameter
Enabled
Disabled
1 to 99 digits
(excl. start/stop codes and
2-digit C/D)
Parameter
Enabled without C/D
Enabled with C/D (1 digit)
Enabled with C/D (1 digits
Disabled
Enabled
Disabled
3 to 99 digits
(incl. C/D)
：
These can be selected only with the configuration software (Scanner Setting).
62
Default Reference

Chapter 9
Section 9.4

(NOTE 2)
1 digit
(NOTE 1)
99 digits

1 digit
(NOTE 1)
99 digits

Default Reference

1 digit
(NOTE 1)
99 digits
Default Reference


3 digits
(NOTE 1)
99 digits