Interpreting Led Prompts - Avaya 4601 User Manual

Telephone Management and Troubleshooting
Feedback (Handset) Tones
Intercept/Time-out -_-_-_-
Recall Dial - - - -----------
Reorder -- -- -- -- -- --
Ringback ---- ---- ---- ----

Interpreting LED Prompts

Since there is no display, the 4601 uses its LEDs to indicate error, wait, data entry,
and other conditions. Use the following table to interpret and understand the
phone's LED signals.
If This LED
Message Waiting
indicator at the top
of the phone and the
Message button
LED on the left
middle of the
faceplate
Message Waiting
indicator at the top
of the phone and the
Message button
LED on the left
middle of the
faceplate
Meaning
Alternating high and low tone indicating
either a dialing error, denial of a requested
service or failure to dial within a preset
interval (usually 10 seconds) after lifting
the handset or dialing the previous digit.
Three shorts tone bursts followed by a
steady dial tone to indicate a feature
request has been accepted and dialing
can start.
Fast busy tone repeated every
half-second to indicate all phone trunk
lines are busy.
Low-pitched tone repeated 15 times a
minute to indicate the number dialed is
ringing.
Is Doing For This
This Amount of Time
Flashing on 500 milliseconds
and off on, 500
milliseconds off,
continuously
Illuminated, Steadily
but not
flashing,
winking, or
fluttering
Interpreting LED Prompts
Then
The phone is waiting
for you to enter data.
User input is not
allowed (i.e.,
processing is
occurring) or a voice
message is waiting.
Issue 1.8 March 2004
3
23