Interpreting Led Prompts - Avaya 03-600759 User Manual

Interpreting LED Prompts

Since there is no display, the 4601 uses its LEDs to indicate error, wait, data entry, and other
conditions. Use the following table to interpret and understand the phone's LED signals.
If This LED
Message Waiting
indicator at the top
of the phone and
the Message
button LED on the
left middle of the
faceplate
Message Waiting
indicator at the top
of the phone and
the Message
button LED on the
left middle of the
faceplate
Call Appearance
Line a's indicator
Is Doing This For This Amount of Time
Flashing on 500 milliseconds on, 500
and off milliseconds off,
continuously
Illuminated, Steadily
but not
flashing,
winking, or
fluttering
Winking one 200 milliseconds on, 50
or more times milliseconds off
Interpreting LED Prompts
Then
The phone is waiting for
you to enter data.
User input is not allowed
(i.e., processing is
occurring) or a voice
message is waiting.
The telephone is providing
feedback after you enter
(press) a numeric digit from
1 to 9. This occurs, for
example, when registering
your phone for the first time
(see Registering the Phone
in Chapter 2: Using Your
4601 IP Telephone).
Basically, the indicator
"winks out" the digit you
pressed (for example, if
you pressed 4, Call
Appearance Line a's
indicator winks four times).
Each subsequent digit you
press causes Call
Appearance Lines a and b
to alternate winks.
Issue 3 April 2006
1 of 2
21