Installing A Hard Drive In Bay 4 - IBM NETVISTA 2251 Hardware Maintenance Manual

below for the drive settings.

Installing a hard drive in bay 4

To install a hard drive in bay 4, do the following:
1. Remove the cover (see "Removing the cover" on page 19).
2. From the bottom of the machine, remove the two screws that retain the hard
24
Hardware Maintenance Manual
AUDIO
39
R G G L
40
See Jumper
Settings Below
CD-ROM Primary (Master)
40X
48X
drive mounting bracket.
IDE INTERFACE DC INPUT
1
5V G G 12V
2
: :
: :
Secondary (Slave)
: :
: :