Connecting Wires To Terminals - Kenwood KDC-X994 Instruction Manual

Connecting Wires to Terminals

⁄
Do not remove the cap when you
do not use the USB cable. The
connector will cause the unit to
malfunction if it gets in touch with
any metallic part of the vehicle.
⁄
• Speaker Impedance:
4 – 8 Ω
• USB terminal Maximum Supply
current
: 500 mA
Car fuse box
(Main fuse)
+
Battery
12 | Quick Start Guide
Microphone
(Accessory5)
To front right speaker
Ignition key
switch
Car fuse
box
–
USB connector (1m)
To USB device
Microphone input
(KDC-X994/ KDC-BT945U only)
To front left speaker
To rear left speaker
To rear right speaker
ACC
Ignition wire (Red)
Battery wire (Yellow)
Ground wire (Black) · (To car chassis)
White
White/Black
Gray
Gray/Black
Green
Green/Black
Purple
Purple/Black