Registering Bluetooth Device - Kenwood KDC-X994 Instruction Manual

"1s" – "99s" : A utomatically answers the phone call after
lapse of 1 – 99 seconds.
⁄
• If the time set in the cell-phone is shorter than that set in
the unit, the former will be used.
• This function does not work for call waiting.
• "Bluetooth HF/Audio" (Setting up the Voice Output
Speakers)
Select the speaker which is further from the microphone in
order to prevent howling or echoes.
• "BT F/W Update" (Displaying the Firmware Version)
Display the version of the firmware of this unit.
For how to update the firmware, access our web site.
http://www.kenwood.com/cs/ce/bt/

Registering Bluetooth device

To make your Bluetooth device (cell-phone) usable
with this unit, you need to register it (pairing). You
can register up to 5 Bluetooth devices to this unit.
Registering from this unit
1
Enter Bluetooth mode
KDC-X994 KDC-BT945U
Press the [ ] button.
KDC-X794 KDC-MP745U
Press the [PLAY MODE] button for at least 1
second.
✍ You can also select from "Settings" in Menu List
mode.
2
Enter Bluetooth device registration mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "BT Settings"
"Device Regist.".
Search for the Bluetooth device.
When search is completed, "Finished" is displayed.
3
Select a Bluetooth device
Turn the [VOL] knob and press it when the
desired item is displayed.
4
"Paring" is displayed (except KCA-BT200)
If "Pairing Success" is displayed, proceed to step 7.
If "PIN Code NG" is displayed, proceed to steps 5
to 6.
5
Input the PIN code
Operation type
Select the numbers.
Move to the next digit.
Delete the last digit.
> >
"Detailed Setup"
Operation
Turn the [VOL] knob.
Press the [¢] button.
Press the [4] button.
6
Transmit the PIN code
Press the [VOL] knob for at least 1 second.
If "Pairing Success" is displayed, registration is
completed.
✍ If the error message appears even though the
PIN code is correct, try <Registering Special
Bluetooth device>.
7
Return to the device list
Press the [MENU] button.
8
Exit BT Settings mode
KDC-X994 KDC-BT945U
Press the [ ] button.
KDC-X794 KDC-MP745U
Press the [PLAY MODE] button for at least 1
second.
⁄
• This unit allows up to eight digits to be input for a PIN
code. If a PIN code cannot be input from this unit, it can
be input from the Bluetooth device.
• If there are 5 or more Bluetooth devices registered, you
cannot register a new Bluetooth device.
Registering Special Bluetooth device
Allow registration of a special device that cannot be
registered normally (pairing).
1. Select Special device registration mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "BT Settings" > "Detailed Setup" > "SPCL
DVC Select".
2. Enter Special device registration mode
Press the [VOL] knob for at least 1 second.
A list is displayed.
3. Select a device name
Turn the [VOL] knob and push the center when
the desired device name is displayed.
If "Completed" is displayed, registration is
completed.
4. Go through the procedure step 3 of
<Registering from this unit> and complete
the registration (pairing).
Cancelling Special device registration mode
Press the [MENU] button for at least 1 second.
⁄
• If the device name is not in the list, select "Other Phones".
49
|
English