Tuner Operation; Basic Operation; Tuner Setting; Auto Memory Entry - Kenwood KDC-X994 Instruction Manual

Tuner Operation

SRC MENU VOL
4 ¢

Basic Operation

Selecting Tuner source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select the "Tuner" display.
✍ SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
Selecting the Receiving Band
1. Enter Menu List mode
Press the [MENU] button.
2. Turn the [VOL] knob and press it when the
desired item is displayed.
Select "FM1", "FM2", "FM3" or "AM".
Selecting the Receiving station
Press the [4] or [¢] button.
✍ Details of the station selecting in operation are
set in the "Seek Mode" of
20).

Tuner Setting

You can select following Tuner Setting items.
1
Select Tuner source
2
Enter Menu List mode
Press the [MENU] button.
3
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "Settings".
4
Select the setting item to adjust
Turn the [VOL] knob and press it when the
desired item is displayed.
Display Overview
"Settings"
"Seek Mode" Selects the tuning mode of the radio.
"Auto1": Automatic search for a station.
"Auto2": Search in order of the stations in the
Preset memory.
"Manual": Normal manual tuning control.
20
|
KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U
<Tuner Setting> (page
"Auto Memory" Memorizes 6 stations with good reception
automatically.
Refer to
"TI" Switches to the traffic information automatically
when the traffic bulletin starts. (KDC-X994/
KDC-X794 only)
"OFF"/ "ON"
"Forced MONO" You can reduce the noise when stereo broadcasts
are received as monaural.
"OFF"/ "ON"
5
Make a setting
Press the [4] or [¢] button.
6
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Remarks
• Forced MONO
Strong electrical fields (such as from power lines) may
cause unstable sound quality when it is set to ON. In such
a situation, turn it OFF.
• Traffic information (TI)
Turns ON or OFF the Traffic Information function.
When the function is set to ON, "TI" indicator is ON.
If traffic bulletin starts when the function is ON,
"Traffic INFO" is displayed and traffic information is
received.
If the volume is adjusted during reception of traffic
information, the adjusted volume is memorized
automatically. The memorized volume will be applied next
time the Traffic Information function is turned ON.
<Auto Memory Entry> (page 21)
( : Factory setting)