Call Pickup; Directed Call Pickup; Call Return; Call Transfer - Blind - Polycom IP 650 User Manual

2. Press *88.
3. Follow the

Call Pickup

This feature enables a user to pickup a call that is coming in on another user's line. The other user's line must be in
the same 'pickup group' with the user activating the feature. Pickup groups are pre-configured by the System
Administrator.
Using the Feature
1. GO OFF HOOK
2. Press *98.

Directed Call Pickup

This feature enables a user to pickup a call that is coming in on another user's line without being specifically
assigned to a common group. The other user's line must also have the Directed Call Pickup feature assigned to it.
Using the Feature
1. GO OFF HOOK
2. Press plus the extension that you wish to pickup.
*97

Call Return

Allows a user to call back the last number that called their line, regardless of whether or not the phone was
answered.
Using the Feature
1.
GO OFF HOOK
2. Press *69.
Call Transfer – Blind
Allow incoming calls to be transferred to another line without consultation with the receiving party.
Using the Feature
1. During the call, Press the
2. Press the
BLIND
3. Enter the transfer
4. Press the SEND
5.
HANG UP.
Extended Functionality
A user may use the
Call Transfer – Consult
Allow incoming calls to be transferred to another line with consultation with the receiving party.
Zayo Managed Services
IVR instructions.
TRNSFER
soft key.
NUMBER with the KEYPAD.
soft key.
Feature Key instead of the soft key.
TRANSFER
soft key. This will place the caller on hold and provide dial tone.
IP 650 User Guide
Polycom IP 650 User Guide
Page 8 of 13