Oce ColorWave 600 User Manual page 7

• Do not remove covers and panels which are fixed to the machine. Some machines
have a high-voltage component or a laser beam source inside that could cause an
electrical shock or blindness
• Do not modify this machine, because this could cause a fire, electrical shock or
breakdown. If the machine contains a laser, the laser beam source could cause blindness.
Attention
• Do not carry out maintenance activities for other components and maintenance ma-
terials than the components and materials that are mentioned in the user manual.
• Do not place any liquids on the machine.
• Do not open any door while the machine starts up or runs, unless the operator panel
displays a message that asks you to open one or more doors.
• Use maintenance materials or other materials for their intended purpose only.
• To avoid any risk, only properly qualified and trained service technicians are allowed
to modify the machine.
• Do not bridge any mechanical or electrical circuit breakers.
Note
• Keep maintenance materials away from children.
Power cord
Caution
•
Do not use any power cable other than the one provided. Never use the power cable
with any other electrical device.
• Do not scratch, abrade, heat, twist, bend, place a heavy object on or cause any other
damage to the power cord. The use of a damaged power cord (exposed core wire,
broken wire, for example) could result in a fire or breakdown. If you find any of these
conditions, immediately turn OFF the power switch and unplug the power cord from
the power outlet. Then call your authorized service representative.
• Do not use an extension lead to connect the machine.
Power source
Caution
• Put the power plug directly into a wall socket that has the same configuration as the
plug. The use of an adapter leads can result in an inadequate power supply. If a
proper wall outlet is not available, ask a qualified electrician to carry out the installation.
• Do not connect the machine to a mains voltage that differs from the value as stated
on the power marking label.
• Do not use a multiple outlet adapter or an extension lead. Contact your authorized
service representative if an extension lead is required.
Attention
Instructions for safe use
Chapter 1 - Instructions for safe use 7