Oce ColorWave 600 User Manual page 10

Instructions for safe use
Actions in response to troubles
Caution
•
When a piece of metal, water or any other similar foreign matter gets inside the ma-
chine, immediately turn OFF the power switch and unplug the power cord from the
power outlet. Then call your authorized service representative.
• Immediately stop using the machine if the machine becomes excessively hot, emits
smoke, or produces unusual odors or noises. Immediately turn OFF the power switch
and unplug the power cord from the power outlet. Then call your authorized service
representative.
Attention
• Stop using the machine if the machine was dropped or a cover was damaged. Imme-
diately turn OFF the power switch and unplug the power cord from the power outlet.
Then call your authorized service representative.
• Some areas inside the machine become hot. Touching these areas could cause burns.
When you check for malfunctions inside the machine such as a paper misfeed, do not
touch the locations which are labeled "high temperature". You can find these labels
around the fusing unit, for example.
• LCD display. Do not rub, press or touch the display surface with hard material, because
the polarizer at the surface can be easily scratched. The LCD module consists of glass.
Therefore, the LCD module can damage when you drop, pinch strongly or punch
the module. When glass breaks, be careful that you do not get injured by glass pieces.
Call Customer Service.
Consumables, supplies and maintenance materials
Attention
• Do not leave a toner unit or drum unit in a place within reach of children.
• Always use the materials which the manufacturer recommended and which are devel-
oped for this machine. Materials not approved by the manufacturer may result in
faults in your machine.
Opening drawers
Attention
• Only one drawer can be opened at the same time. This is to prevent overbalance of
the machine.
Moving the machine
Attention
• Make sure that you disconnect the power cord and other cables before you move the
machine.
• Make sure that you check the documentation for the space requirements before you
move the machine.
10 Chapter 1 - Instructions for safe use