Components
UP
1
DN
UP
1
DN
UP
DN
1. Power trim and tilt switch
The switch on the control grip controls all
outboard motors at the same time.
For instructions on using the power trim and
tilt switches, see pages 91 and 93.
EMU35040
Tilt limiter
This outboard motor is equipped with a tilt
limiter that controls the tilt range.
44
UP
ZMU05964
DN
ZMU07308
UP
1
ZMU07309
DN
TIP:
Consult your Yamaha dealer about changing
the setting.
EMU35030
Tilt support lever for power trim and
tilt model
1
To keep the outboard motor in the tilted up
position, lock the tilt support lever to the
clamp bracket. Make sure that the lever is
securely retained by the bolts.
ECM00660
NOTICE
Do not use the tilt support lever or knob
when trailering the boat. The outboard
motor could shake loose from the tilt sup-
port and fall. If the motor cannot be trail-
ered in the normal running position, use
an additional support device to secure it
in the tilt position.
ZMU05824