Engine Shut-Off Cord (Lanyard); Engine Oil; Engine; Flushing Device - Yamaha F350 Owner's Manual

Operation
with no binding or excessive free play.
Operate the throttle levers several times to

make sure there is no hesitation in their
travel. Operation should be smooth over
the complete range of motion, and each le-
ver should return completely to the idle po-
sition.
EMU40362

Engine shut-off cord (lanyard)

Check the engine shut-off cord and clip for
damage, such as cuts, breaks, and wear.
1. Clip
2. Engine shut-off cord (lanyard)
EMU40993

Engine oil

1. Place the outboard motor in a vertical
position (not tilted). NOTICE: If the out-
board motor is not level, the oil level
indicated on the oil dipstick may not
be accurate.
[ECM01861]
2. Remove the oil dipstick and wipe it
clean.
66
1
2
ZMU06873
1. Oil dipstick
3. Insert the oil dipstick completely and re-
move it again.
4. Check that the oil level on the oil dipstick
is between the upper and lower marks.
Consult your Yamaha dealer if the oil
level is not at the proper level or if it ap-
pears milky or dirty.
3
2
1. Oil dipstick
2. Lower mark
3. Upper mark
EMU27153

Engine

Check the engine and engine mounting.

Look for loose or damaged fasteners.

Check the propeller for damage.

Check for engine oil leaks.

EMU36493

Flushing device

Check that the flushing device's garden hose
1
ZMU05905
1
ZMU05918