Tilt Limiter; Tilt Support Lever For Power Trim; And Tilt Model; Top Cowling Lock Lever (Turn Type) - Yamaha F300 Owner's Manual

UP
1
DN
1. Power trim and tilt switch
On the twin engine control, the switch on the
control grip controls both outboard motors at
the same time.
On the triple engine control, the switch on the
control grip controls all outboard motors at
the same time.
For instructions on using the power trim and
tilt switches, see pages 77 and 79.
EMU35040

Tilt limiter

This outboard motor is equipped with a tilt
limiter that controls the tilt range.
TIP:
Consult your Yamaha dealer about changing
the setting.
EMU35030
Tilt support lever for power trim and
tilt model
To keep the outboard motor in the tilted up
position, lock the tilt support lever to the
clamp bracket. Make sure that the lever is
securely retained by the bolts.
UP
ZMU05964
DN
1
ECM00660
NOTICE
Do not use the tilt support lever or knob
when trailering the boat. The outboard
motor could shake loose from the tilt sup-
port and fall. If the motor cannot be trail-
ered in the normal running position, use
an additional support device to secure it
in the tilt position.
EMU35051

Top cowling lock lever (turn type)

To remove the top cowling, turn the front and
side lock levers to release them and lift off
the cowling. Reverse this procedure when
reinstalling the top cowling.
Components
ZMU05824
39