Procedure For Tilting Up; Trim And Tilt Models) - Yamaha F350 Owner's Manual

Operation
EWM01543
WARNING
Make sure that all people are clear of the
outboard motor when tilting the outboard
motor up and down. Body parts can be
crushed between the outboard motor and
the clamp bracket when the outboard mo-
tor is trimmed or tilted.
ECM00991
NOTICE
Before tilting the outboard motor, fol-

low the procedure under "Stopping en-
gine" in this chapter. Never tilt the
outboard motor while the engine is run-
ning. Severe damage from overheating
can result.
To prevent the cooling water passages

from becoming frozen when the ambi-
ent temperature is 5C or below, tilt the
outboard motor up after it has been
stopped 30 seconds or more.
EMU35509
Procedure for tilting up (power trim
and tilt models)
1. Place the control lever in neutral.
94
N
ZMU06236
2. Press the power trim and tilt switch "
(up) until the outboard motor has tilted
up completely.
UP
N
ZMU05829
ZMU06280
UP
ZMU05837
"