If the water separator-alert indicator blinks,
perform the following procedure.
1.
Stop the engine.
2.
Remove the top cowling.
3.
Disconnect the lead from the holder.
4.
Disconnect the water detection switch
coupler from the holder.
5.
Disconnect the water detection switch
coupler. NOTICE: Be careful not to get
any water on the water detection
switch coupler, otherwise a malfunc-
ZMU05893
tion could occur.
1. Water detection switch coupler
6.
Remove the bolts to remove the cover.
Trouble Recovery
[ECM01950]
ZMU05892
1
ZMU05894
125