Power Trim And Tilt Switches; Tilt Limiter; Tilt Support Lever For Power Trim And Tilt Model - Yamaha F300A Owner's Manual

EMU35851

Power trim and tilt switches

The power trim and tilt system adjusts the
outboard motor angle in relation to the tran-
som. Pushing the switch "
outboard motor up, and then tilts it up. Press-
ing the switch " " (down) tilts the outboard
motor down and trims it down. When the
switch is released, the outboard motor will
stop in its current position.
UP
1
DN
1
UP
1
DN
1. Power trim and tilt switch
UP
DN
ZMU05823
" (up) trims the
UP
ZMU05835
DN
UP
ZMU05964
DN
On the twin engine control, the switch on the
control grip controls both outboard motors at
the same time.
On the triple engine control, the switch on the
control grip controls all outboard motors at
the same time.
For instructions on using the power trim and
tilt switches, see pages 73 and 76.
EMU35040

Tilt limiter

This outboard motor is equipped with a tilt
limiter that controls the tilt range.
TIP:
Consult your Yamaha dealer about changing
the setting.
EMU35030
Tilt support lever for power trim and
tilt model
To keep the outboard motor in the tilted up
position, lock the tilt support lever to the
clamp bracket. Make sure that the lever is
securely retained by the bolts.
1
1
Components
ZMU05824
33