Table of Contents
Advertisement
7.1 Storage Overview
The Storage "Overview" screen presents the current network storage services status
summary. The system administrator can quickly view important details of the network
storage condition and services.
NETWORK STORAGE STAUS
This section lists the current status of the storage.
Total Capacity: Displays the total storage size in Gigabyte.
Free Capacity: Displays the available storage size in Gigabyte.
RAID Level: Displays the current storage RAID level: RAID 0, RAID 0+1, or RAID
5.
RAID Status: Displays the current RAID state of operation: active, rebuilding,
sync, or removed. Once the RAID is in "removed" state, check the disk status to
determine which disk is fault. Please refer to Appendix A - FAST RECOVERY.
NFS Status: Displays the status of the NFS service, up or down.
Disk Status: Displays the status of the 4 disks, good or bad.
DISK STAUS
This section lists the current status of the four disks, good or bad. If any disk is in bad state,
please replace the faulty one as soon as possible to avoid the loss of data.
Disk1: Displays the status of the first disk,
Disk2: Displays the status of the second disk.
Disk3: Displays the status of the third disk.
Disk4: Displays the status of the fourth disk.
VOLUME LIST
This section lists all the existing volumes with the brief information of their configuration and
status.
Name: Displays the volume name.
Capacity: Displays the specific volume capacity in Gigabyte.
Free Capacity: Displays the available size of the specific volume in Gigabyte.
52
Advertisement
Table of Contents
