Insert A New Disk (Hot-Plug) - Planet UMG-2000 User Manual

Insert a New Disk (Hot-Plug)

After the alert LED is turned off, you can plug in the new hard disk. Then the alert LED will
flash again. Please do not insert or remove any disks while the LED is flashing. After
plugging the new devices into the disk bay, the RAID will rebuilt corrupted data
automatically. The data repair duration may be vary depend upon the size of the storage
disk. For example, the hard disk capacity of 160GBytes may take 45 minutes to repair;
while the hard disk capacity of 1TBytes will take approximately 8 hours to repair the
damaged data.
117