Operation Instructions; Ignition Switch/Steering Handlebar Lock - KYMCO Vitality 50 Owner's Manual

3. OPERATION INSTRUCTIONS

(1) IGNITION SWITCH/STEERING HANDLEBAR LOCK

(1) ON : At this position, power is connected to start
the engine. The key cannot be taken out.
OFF
(2) : At this position, power is cut off and the
engine stops. The key can be taken out.
(3) LOCK : At this position, the steering handlebar is
locked. The key can be taken out
Locking Method
Turn the steering handlebar left to the full and then push
and turn the ignition switch key left to the "
position the handlebar can be locked.
Unlocking Method
Turn the ignition switch key right to the"
" LOCK " is released automatically.
CAUTION:
After locking, turn the handlebar gently to make
sure that it is locked.
Do not turn the ignition switch to the"LOCK"
position during riding,
will be out of control and
Don't park your scooter at a place to hinder the
traffic.
LOCK "
OFF " and the
otherwise the handlebar
cause accidents.
(2)
(3)
(1)