Automatic Programmer; Set The Clock; Manual Mode; The Timer - Britannia RANGE COOKERS Instruction Manual

Automatic Programm

Automatic Programmer

To set the clock:
Press the and the
used to set the 24hr clock.
Once the correct time is set the
To set manual mode:
The programmer must be set to manual mode for ordinary cooking. The
oven will not operate if the programmer has been left in automatic mode,
so always remember to switch modes at the end of any automatic cooking.
Press the and
the window, and the
programmes are cancelled.
To set the timer:
1 Press the button to select the timer.
2 Use the + and - buttons to select the length of time required. The
appear in the display.
3 After setting the timer, the display will return to show the clock time,
but if you want to check the time remaining, you can press the
button and it will be displayed.
4 At the end of the elapsed time, the alarm buzzer will sound and the
oven will switch off. Press the
5 To cancel the timer at any time, press the
remaining time, then press the - button until the display shows 00:00.
The automatic programmer can be used to control the left hand multi
function oven, either to set cooking end times or to set start and end
times. It is not recommended to use in conjunction with the probe
which is governed by core temperature.
To set the oven to switch off automatically after a set period:
Use this function if you have already started cooking and want the oven to
switch off automatically after a certain period of time (for example 30
minutes).
1 Press the button to select the cooking period.
2 Use the + and – buttons to select the cooking time. The "A" symbol will
appear in the display, and the current clock time will be shown.
3 To check the cooking time remaining, you can press the
any time.
4 To show the actual time that the oven will switch off, you can press the
button at any time.
5 The alarm will sound at the end of the cooking time and the oven will
switch off. Press the
The 'M' on the programmer (Delphi model only) will cancel any
automatic programme set.
20
buttons together, the + and – buttons can be
symbol will appear in the display.
buttons together. The 'A' symbol will disappear from
symbol will appear. Any previously set
button to silence the alarm.
button to silence it.
will
button to display the
button at