Britannia RANGE COOKERS Instruction Manual page 10

Table of Contents

Advertisement

Induction
Induction
To switch a cooking zone on:
Turn the control knob clockwise to the desired setting 1 – 9. 1 is the lowest setting and 9 is the highest.
To switch a cooking zone off:
Turn control knob anti-clockwise to the off position.
Power rating
Size
Power
Boost
Ø200mm
Ø250mm
2
3
Ø160mm
1
Using the boost function:
All zones benefit from a boost function. Use this function if you wish to bring a pan to the boil very quickly.
1. Turn the control knob clockwise past setting 9. One more click will be felt and then "P" will appear on the hob
display.
2. To end the boost, simply turn the knob back anti-clockwise to select a lower power setting or turn the zone off. The
maximum operating time in boost is 10 minutes, after which the zone will automatically return to power level 9.
The boost will end automatically if:
A lower power setting is selected.
The pan is removed. (Boost will re-commence when the pan is replaced.)
The zone overheats.
The boost function can only be used on a maximum of three cooking zones at the same time. The cooking zones are
networked in pairs, one pair to the left, one to the right and one in the middle. Only one zone of each pair can use boost
at any one time. If both zones are in use and one is set to boost, then the power level to the other zone may be reduced.
Because of the rapid heating action of the boost function, your hob should never be left unsupervised while it is in use,
not even for a short while.
The boost function will be switched off for safety reasons when the pan base reaches a temperature of 310°C. This is to
prevent overheating.
Auto Heat-up
When Auto Heat-up is selected, the cooking zone will heat at boost for a set period. After that period, the power level
automatically reduces to your pre-selected setting. This function can be used, for example, for bringing a pan of pasta to
the boil before reducing to a simmer.
To select Auto Heat-up:
Turn the control knob anti-clockwise one click and hold for 2 seconds before releasing. "A" will appear in the hob
display. Then, within 3 seconds, select a cooking level that you want the power to reduce to.
It is recommended to use a very large pan that is at maximum half full. At any time during the Auto Heat-up you can
alter the continued cooking setting. Removing the pan from the cooking zone will interrupt the Auto Heat-up but the
program will recommence once the pan is replaced.
10
1+4
1.1kW
1.4kW
Ø200mm
5
Ø160mm
4
Electric
2
3+5
1.4kW
2.3kW
2kW
3kW
Electric

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents