Section One:
Parts Supplied:
2 Legs w/ axels
Hardware Suppled:
Tools Required:
1—7/16" Open End Box Wrench
Or
1– Adjustable Crescent Wrench
Installation Steps
Step 1 Attach legs to barrel:
To ease installation, gently lay the barrel on its end, not the
hopper end.
A piece of cardboard or blanket should be placed under
the grill to prevent scratching the finish.
Using the 7/16" wrench, install the 2 legs WITHOUT the
wheel axles to the bottom of the barrel.
Part # 11a & 11b
Reminder: Leg with Bottle Opener faces out toward the
Front of the grill.
Fasten all four 1/4" - #20 x 1/2" screws (A) through the
four pre-drilled screw holes both on the leg and
on the bottom of the barrel.
FASTEN ONLY, DO NOT TIGHTEN AT THIS POINT.
THIS ALLOWS FOR EASIER INSTALLATION OF
BOTTOM SHELF.
Install the 2 legs WITH the wheel axles to the top of the
barrel. ( hopper end) Part # 8
Fasten all four 1/4" - #20 x 1/2" screws (A) through the four
pre-drilled screw holes both on the leg and
on the bottom of the barrel.
FASTEN ONLY, DO NOT TIGHTEN AT THIS POINT.
ASSEMBLY INSTRUCTIONS
ASSEMBLING & MOUNTING THE LEGS & SHELF
2 Legs
2 Metal Wheels
1 Bottom Shelf
7/16" Driver
Cordless Drill
8
11b
11a
Page 6